Embedded Files
About
About
The MSU is a plug-in system for the MM3A-EM that adds a miniturized soldering iron to your experimental setup. The plug-in provides a solution for heating a small tip. The unit has an integrated heating and sensing system in order to maintain the temperature set using the included Temperature Control System. The Micro Soldering Unit can be fitted with custom tips that have a shaft diameter of 0.5 mm.
Your existing MM3A-EM micromanipulator system can be quickly and easily upgraded for use with the MSU-EM.
Specifications (click to expand)
Specifications (click to expand)
Overview
Overview
Temperature range at air: RT - 100°C
Temperature range in vacuum: RT - 200°C
Temperature resolution (controller): 1°C
Long term temperature stability (sensor): Better than 0.05% at 200°C after 1000 h
Temperature stability (controller): 1°C
Absolute temperature accuracy (sensor): 0.5%
Analog voltage output accuracy: 0.5% (after offset correction)
Heating-up time from room temperature: 100 s to 100°C, 200 s to 200°C (in vacuum, depending on vacuum level)
Cooling-down time from 200°C: 200 s to 100°C, 600 s to 45°C (in vacuum, depending on vacuum level)
Pressure range: 10⁻⁷ mbar to 1200 mbar
All technical specifications are approximate. Due to continuous development, we reserve the right to change specifications without notice.
Report abuse